-40%

ETC UFR2-LV Dual-Zone DMX Relay with 0-10V

$ 130.94

Availability: 96 in stock
  • MPN: UFR2-LV
  • Brand: ETC
  • Type: Relay
  • Control: DMX
  • Condition: New

    Description

    The ETC UFR2-LV Unison Foundry® 0-10V Dimming Controller offers DMX controlled, fully-rated 20-Amp relays with fully isolated 0-10V dimming for direct control of compatible LED drivers and fluorescent dimming ballasts. This style of dimming controller can be mounted to electrical junction boxes.
    The UFR2-LV Controller provides two outputs of control that can be wired to individual fixtures or used for zone control. Each output can be configured to a separate DMX address, or both outputs can be controlled in unison by setting the 0–10V Controller to single-channel mode. This model allows you to control connected loads from any DMX control device. Configure the 0–10V Controller either remotely via RDM (using a tool like ETC Net3 Concert) or locally on the controller.
    Applications for the ETC UFR2-LV:
    Arena and stadium suites
    Office buildings
    Conference and meeting rooms
    Healthcare facilities
    Houses of worship
    Classrooms
    Hospitality and restaurants
    Retail
    ETC UFR2-LV Features:
    Switched power control of two circuits with 0-10V dimming
    20A fully-rated relays for use with general purpose, tungsten, fluorescent and LED loads
    Supports plug loads
    120/277VAC power input
    DMX controlled and RDM configurable
    ETC UFR2-LV Specifications:
    Ambient Environment:
    For indoor use only.
    Rated for plenum use.
    32°F to 104°F (0°C to 40°C) operating temperatures in 5–95% non-condensing humidity.
    Electrical Specification:
    The 0-10V Controller Supports:
    Power input 120–277VAC, 60 Hz
    Maximum load rating is 20A (total connected load)
    NOTE: The maximum load on the 0-10V Controller can be split between the two relay outputs in any combination required for the installation, but cannot exceed 20A total connected load for the controller.
    Independent control for 0-10V fluorescent ballasts and/or LED drivers, each is capable of sinking 100mA
    Supported Load Types (all voltages):
    20A fully-rated relay for use with general purpose, tungsten, fluorescent, and LED lighting loads.
    Compliance:
    UL and cUL listed
    Conforms to UL 916 (Energy Management Equipment) and UL 2043 (Plenum rated)
    Physical:
    Size (H x W x D): 2 x 3.5 x 3 in
    Weight: 0.75 lbs