ETC ELVD-G2 Echo 600-Watt 120V Phase Adaptive Dimmer

Description

The Echo Phase-Adaptive Dimmer provides reverse- or forward- phase dimming for loads up to 600 watts on 120 Volts. It is compatible with all Echo control products, including daylight and occupancy sensors and manual control stations, providing flexibility and energy savings.
Applications
Houses of worship
Education
Hospitality
Healthcare facilities
Office buildings
Conference rooms
Meeting rooms
Retail
Features
Single-channel, 600-watt dimmer
Forward or Reverse-phase operations
120V power input
Plug and Play: ready to go out of the box, no software or external programming required
Supports Unison Echo control stations and responsive controls
EchoConnect®: Two-wire topology-free system gives you the freedom to put station where you need them
Up to 16 Echo control products
Up to 16 Echo output products
Up to 500 meters (1,640 feet) of control-wire per system
Specifications
Construction:
Constructed of Injection-molded ABS plastic
Button interface and LED indicator per zone for configuration
Rotary dials for selection of space and zone number
Half-inch conduit knockout mounted
Mains-voltage wiring exits through knockout mount
EchoConnect wiring exits through side of controller
MicroSD for field software upgrades
Optional mounting plate available for applications that require low-voltage wiring to be in conduit
External heatsink
Mains power input:
12 AWG Hot - Black (120V), Brown (277V)
14 AWG Neutral - White
12 AWG Ground - Green/Yellow
Dimmed output: 12 AWG - Red
Electrical:
120V or 277VAC, 50/60Hz power input
Phase-adaptive, default reverse phase
600W resistive or electronic load capacity
300W magnetic load capacity (120V only)
Magnetic transformers must be properly loaded to their rated current
Use care when retrofitting magnetic transformers with LED loads to ensure proper loading
EchoConnect Class 2 control network:
Topology-free wiring using Belden 8471 or equivalent and one #18 ESD drain wire
Wiring may be bus, loop, homerun or any combination of these
Up to 500 meters (1640 feet) of control wiring per system
Optional Cat5/5e wiring using Belden 1583A or equivalent (Requires optional Cat5 termination accessories)
Certifications: UL and cUL LISTED (Conforms to UL 508 and UL 2043)
Thermal:
Ambient room temperature: -10 to 45°C / 14 to 113°F
Ambient humidity: 5 to 95% non-condensing