-40%
#1545 1/2 READING ENTRY LOCK w/CYLINDER & KEYS DOUBLE THUMB SET 1890 (7590-1)
#1545 1/2 READING ENTRY LOCK w/CYLINDER & KEYS DOUBLE THUMB SET 1890 (7590-1)
#1545 1/2 READING ENTRY LOCK w/CYLINDER & KEYS DOUBLE THUMB SET 1890 (7590-1)
#1545 1/2 READING ENTRY LOCK w/CYLINDER & KEYS DOUBLE THUMB SET 1890 (7590-1)
#1545 1/2 READING ENTRY LOCK w/CYLINDER & KEYS DOUBLE THUMB SET 1890 (7590-1)
#1545 1/2 READING ENTRY LOCK w/CYLINDER & KEYS DOUBLE THUMB SET 1890 (7590-1)

#1545 1/2 READING ENTRY LOCK w/CYLINDER & KEYS DOUBLE THUMB SET 1890 (7590-1)

$ 58.08

Availability: 14 in stock
  • Condition: DESIGNED FOR OUTSIDE THUMB LATCH HANDLE AND FOR A TURN KNOB FROM THE INSIDE. CIRCA 1890-1910 READING HARDWARE ENTRY LOCK CALLED 'VASSAR', COMES WITH A NEW CYLINDER LOCK AND TWO KEYS THAT WORK FINE, 7 5/16" FACEPLATE, NICE CONDITION OVER ALL WITH PUSH BUTTONS.
  • Maker: READING HARDWARE
  • Decade: 1890-1910
  • Original/Reproduction: Antique Original
  • Features: Restored
  • Restocking Fee: 15%
  • All returns accepted: Returns Accepted
  • Material: Brass and Steel
  • Item must be returned within: 30 Days
  • Color: BRASS
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Type: MORTISE LOCK ENTRY SET

    Description

    eBay Listing Template r1
    IF YOU DON'T SEE THE LOCK YOU NEED, ASK US, WE STOCK THOUSANDS OF OLD LOCKS!
    1890 R.H.Co 'VASSAR'  ENTRY LOCK # 1545 1/2 with CYLINDER & KEYS DOUBLE THUMB SET (7590-1)
    Vintage:  circa 1890-1910: READING HARDWARE, works fine, entry mortise lock with with a new Superior Security cylinder lock and two keys.  This is the type that was made for a thumb latch on each side of the front door, does NOT accommodate a turn knob.
    The lock is reversible.  Heavy brass faceplate with body of the lock clearly maker marked RHC one of America's many high quality manufacturers of builder's hardware during the second half of the 19th Century and early 20th Century.
    Dimensions as follows:
    Brass front plate is marked VASSAR and measures  7 3/16" long, 1 5/16" wide, 1/8" thick.
    The back set (the measurement from the front edge of the brass faceplate to the center of the cylinder lock hole) is 2 3/4".
    Box is 3 1/2" deep from the back of the front plate and it is 5 1/8" top to bottom.  Screws are on 6 1/4" centers.  The lock is made for a thumb latch operated entry handle on both sides of the door which is why it does not have a knob post.
    Very clean inside and out, no rust, functions very well, heavy duty and with keys!
    SEE OUR FULL INVENTORY of MORTISE LOCKS & KEYS HERE!
    Village Salvage • 85 S. Main Street • P.O. Box 284
    Waynesville • Ohio • 45068